-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Solder Paste Stencil Design for Optimal QFN Yield and Reliability
April 29, 2015 | Ben Gumpert, Lockheed MartinEstimated reading time: 13 minutes
These two components were selected based on results of previous testing. The QFN68 package has a very high die to body size ratio, and has performed relatively poorly in other thermal cycle tests. The QFN44 package, however, has a low die to body size ratio, and in a previous test, there were no failures after 2520 thermal cycles. This testing will investigate the ability to improve results on a ‘poorly’ performing part, as well as the potential for reducing performance on a ‘robust’ part.
To develop an idea about how the chosen experimental parameters and variation would affect test results, a simulation software package was used to predict the outcomes of the testing. Figure 2 shows the results of that simulation and the prediction of the average thermal cycle survival period for the QFN68 package at the solder joint heights to be used in this test. Results of previous testing were used as a baseline to fit the prediction results to the test vehicle used.
A 5 mil stencil was used for solder paste application with apertures similar to those shown in Figure 3, but which varied by location on the board to control the volume of solder deposited at different sites across the assembly. The volume of solder was controlled by the number and size of apertures on the center pad of the QFN/BTC footprint. The volume of solder applied to the perimeter pins was also adjusted, with the objective of creating similar solder joints on all component locations (i.e. solder joint with the same amount of toe wetting and with similar fillet shape), although the height of these joints was different from location to location. Ten different aperture patterns were used for the QFN44 package, and 14 different aperture patterns were used for the QFN68 package. Reduction of solder on the center pad ranged from 10% to 90%. These values are outside of both the minimum and maximum recommendations, but are being evaluated to observe potential trends.
Page 2 of 4
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.