-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Tin Whisker Risk Assessment of a Tin Surface Finished Connector
March 18, 2015 | David Hillman and Ross Wilcoxon, Rockwell CollinsEstimated reading time: 2 minutes
Rockwell Collins initially investigated and qualified Samtec’s SEARAY solder charge connector (hereafter referred to as "the connector") technology with a focus on solder joint integrity. However, the connector in question, which has a matte tin finish on the solder tail, was found to have a potential risk of tin whiskers due to a small region of the connector that was not protected by either solder poisoning or the connector’s mechanical configuration.
An investigation was conducted in accordance with modified JESD201 tin whisker susceptibility protocols to assess the possible tin whisker risk concern. The investigation results, coupled with plating and reflow soldering data inputs, demonstrated that the connector’s tin whisker risk was extremely low and deemed acceptable.
Background
The implementation of the RoHS European Union Directive in 2005 led to the use of pure tin as an accepted surface finish for PCBs and component terminations. A drawback of pure tin surface finishes is the potential to form tin whiskers. Tin whiskers are a metallurgical phenomenon that is associated with tin rich/pure tin materials and has been a topic of intense industry interest.
The acceptance and usage of pure tin by the electronics industry component fabricators is understandable as the pure tin surface finishes are inexpensive, are simple plating systems to operate and have reasonable solderability characteristics. However, the commercial electronics segment, which uses the majority of electronic components, often has product life cycles that are measured in months.
In contrast, high performance/harsh environment electronics typically have product life cycles that are measured in decades and therefore are much more susceptible to the potential long term threat of tin whiskers. Industry studies have shown that pure tin surfaces can be “poisoned” with tin/lead solder provided the tin plating is consumed/converted during the soldering process. With many short components such as resistors or capacitors, the soldering process consistently and repeatedly eliminates any tin whisker risk. However, the component lead geometry, solder paste deposit and component pad dimensions all factor into whether a component can be successfully poisoned by the soldering process.
Connectors are typically not an issue, in terms of solder poisoning, as connector suppliers utilize the connector housing design/configuration to eliminate potential shorting from a tin whisker or ensure that the areas with pure tin surface finishes will be poisoned as part of the soldering process.
Previously, Rockwell Collins completed a connector technology qualification that included the Samtec SEARAY solder charge connector. The connector had very robust thermal cycle solder joint integrity and utilized a matte tin (i.e., pure tin) surface finish on the non-contact pin surfaces. During metallographic cross-sectioning phase of the connector’s qualification effort, it was observed that a region of matte tin was not poisoned during the soldering process nor was the tin whisker shorting potential in this region mitigated by the connector design/configuration. An investigation was conducted to determine if this region of the connector posed a tin whisker risk threat.
Editor's Note: This article originally appeared in the February issue of SMT Magazine.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.