-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Composite Properties of Rigid vs. Multilayer PCBs
June 17, 2015 | Chet GuilesEstimated reading time: 2 minutes
Abstract
Most materials systems used in PWBs (aka PCBs) are composites of resins, fabric substrates and metal cladding. Each of these components has its own unique electrical and mechanical properties that contribute to the final characteristics of the finished laminates, prepregs and fabricated multilayer boards (MLBs). In most cases variables such as glass style and resin content have offsetting impacts on physical vs. electrical properties.
Data sheets often provide data in standard IPC formats, which may look at properties in rigid laminates (nominal 0.062” made using heavyweight glass at 32–40% resin content) rather than thin lams and prepregs used for multilayer PWBs (which more typically average 55% resin content or more). To further complicate the situation, some product lines are manufactured with consistent resin content for all product thicknesses, thus maintaining the dielectric properties while letting the mechanical properties be dictated by the constructions and resin content.
An understanding of what such variations in properties mean and how they relate to what the users will actually encounter is essential to design, manufacturability, assembly and end-use viability. In this presentation we will look specifically at the effect of glass style and resin content on dielectric constant and CTE and discuss how even at the product design level it is important for design engineers to take these into consideration.
Conclusions
In most cases, no single value of dielectric constant or in-plane CTE (representative laminate properties that are impacted by resin content variation—obviously there are others as well, but for purposes of keeping this work manageable, we will focus on these two) will hold for all thicknesses of laminate or build-ups for MLBs. In those cases where either or both are critical, it is necessary to control resin content in both laminate and prepreg to ensure that the finished properties fall within the desired and expected ranges.
In some cases, such as with 85N polyimide and 92ML thermally conductive epoxy products, the specific values of Dk and CTE are less critical than other things such as processibility and design flexibility (as for 85N) or thermal conductivity (for 92ML) and so resin contents are allowed to vary so as to meet these needs.
In other cases either CTE (as in 85NT) or dielectric constant (as for Multiclad HF or 25N/FR) are critical needs, and in those cases the resin contents must be held to controlled limits so that the desired properties are consistently held for most or all of the laminate configurations.
To read this article, which originally appeared in the May 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.
New North American Product Family Release from Smart Factory Design
03/22/2024 | Smart Factory DesignSmart Factory Design is pleased to announce a new system technology and supply chain model for providing Zero Liquid Discharge (ZLD) Wastewater Recycling Systems to the North American market. Smart Factory Design is an international public benefit company focused on environmental sustainability and autonomous processes for the Printed Circuit Board, IC Substrate, and General Metal Finishing industries.