Innovative Army Technology Gains New Potential
July 13, 2015 | U.S. ArmyEstimated reading time: 3 minutes
As drone technology gains greater public attention, along with its potential for hostile action against American targets, Army engineers adapt ongoing research to counter aerial systems that could threaten Soldiers.
At Picatinny Arsenal, the Extended Area Protection and Survivability Integrated Demonstration, or EAPS ID, began as an Army Technology Objective program. The goal was to develop and demonstrate technology, which could support a gun-based solution to counter rockets, artillery and mortars, or C-RAM.
Research into enhanced C-RAM technology had the goal of extending the range and probability of success against the incoming threat.
"The smaller and smaller the protective area, the more efficient the gun systems become compared to missiles," said Manfredi Luciano, the project officer for the EAPS system. "You don't need as many, and the gun system has certain logistics advantages."
As news reports about potential airborne threats to the White House have stirred public awareness of such threat to U.S. interests, ongoing technology aimed at countering rockets, artillery and mortars could be used to defend against unmanned aerial systems, or UAS, Luciano said.
"It's unbelievable how much it's exploded," Luciano said about the use of drones. "Every country has them now, whether they are armed or not or what level of performance. This is a huge threat has been coming up on everybody. It has kind of almost sneaked up on people, and it's almost more important than the counter-RAM threat."
The UAS challenge has grown exponentially in the last decade as the world's inventory of Unmanned Aircraft Systems has grown from approximately 20 system types and 800 aircraft in 1999, to more than 200 system types and approximately 10,000 unmanned aircraft in 2010, said Nancy Elliott, a spokeswoman with the U.S. Army's Fires Center of Excellence on Fort Sill, Oklahoma.
Although a missile-based C-RAM defense system has been selected as the technical approach for the Indirect Fire Protection Capability Increment 2 Intercept Program of Record, the gun alternative continued to mature as force-protection technologies for other potential applications. In response to proliferation, UAS threats recently were added to the project scope of gun-based force protection.
Luciano and his team, working on enhanced area protection and survivability, tested an integrated system, April 22, by shooting down a class 2 unmanned aerial system using command guidance and command warhead detonation at Yuma Proving Ground, Arizona. Funding for development and testing was provided by the U.S. Army Armament Research, Development and Engineering Center, or ARDEC, Technology Office.
The EAPS ARDEC gun alternative envisions a 50mm cannon to launch command guided interceptors. The system uses a precision tracking radar interferometer as a sensor, a fire control computer, and a radio frequency transmitter and receiver to launch the projectile into an engagement "basket."
"In order to minimize the electronics on board the interceptor and to make it cheaper, all the 'smarts' are basically done on the ground station," Luciano said. "The computations are done on the ground, and the radio frequency sends the information up to the round."
The Picatinny area-protection systems track both the incoming threat and interceptor, then compute an ideal trajectory correction for the interceptor to maximize probability of mission success. A thruster on the interceptor/projectile is used for course correction. The ground station uplinks the maneuver and detonation commands while receiving downlinked assessment data.
The interceptor takes the commands and computes the roll orientation and time to execute thruster and warhead detonation. The warhead has a tantalum-tungsten alloy liner to form forward propelled penetrators for defeat of C-RAM targets, and steel body fragments to counter unmanned aerial systems.
The April 22, 2015, test was performed with a single shot Mann barrel. The UAS was flying a surveillance-type track and was engaged on the approach path leg. The airplane fell precipitously from its flight.
The integrated test demonstrated a proof-of-principle that direct fire, command guided ammunition can intercept and negate aerial threats, Luciano said.
Technologies from the EAPS gun alternative Army Technology Objective may potentially be used for both Army and Navy air defense systems, he added.
Luciano said that during another upcoming test, the engineers would try to intercept and destroy an unmanned aerial system under a more difficult engagement scenario.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).