Engineers Test Fly Printed Aircraft Off Royal Navy Ship
July 30, 2015 | University of SouthamptonEstimated reading time: 2 minutes
HMS Mersey provided the perfect platform for the University of Southampton to test out their SULSA unmanned aerial vehicle (UAV).
Weighing 3kg and measuring 1.5m the airframe was created on a 3D printer using laser sintered nylon and catapulted off HMS Mersey into the Wyke Regis Training Facility in Weymouth, before landing on Chesil Beach.
The flight, which covered roughly 500 metres, lasted less than few minutes but demonstrated the potential use of small lightweight UAVs, which can be easily launched at sea, in a maritime environment. The aircraft carried a small video camera to record its flight and Southampton researchers monitored the flight from their UAV control van with its on-board video-cameras.
Known as Project Triangle the capability demonstration was led by Southampton researchers, making use of the coastal patrol and fisheries protection ship.
Professor Andy Keane, from Engineering and the Environment at the University of Southampton, says: “The key to increased use of UAVs is the simple production of low cost and rugged airframes – we believe our pioneering used of 3D printed nylon has advanced design thinking in the UAV community world-wide.”
It was back in 2011 that University of Southampton engineers initially designed, and flew project SULSA, the world’s first entirely “printed” aircraft.
With a wingspan of nearly 1.5 metres, the UAV being trialled has a cruise speed of 50kts (58mph) but can fly almost silently.
The aircraft is printed in four major parts and can be assembled without the use of any tools.
Watching the demonstration was the Royal Navy’s Commander Maritime Capability (Aviation), Cdr Bow Wheaton.
He said: “The Royal Navy’s Maritime Capability organisation is very interested in conceptual applications of unmanned and highly automated systems.
“We were delighted to assist the University of Southampton with development of their 3-D printed unmanned air vehicle and provide a ship for an embarked launch.”
Southampton alumnus, First Sea Lord Admiral Sir George Zambellas (Aeronautics, 1980) has championed the Navy’s involvement with Project Triangle, which resulted in the opportunity to provide a maritime platform for the test flight.
Adm Zambellas said: “Radical advances in capability often start with small steps. The launch of a 3D-printed aircraft from HMS Mersey is a small glimpse into the innovation and forward thinking that is now embedded in our Navy's approach.
“It's well known that our first squadron of remotely piloted aircraft have proven their worth in the Gulf, providing persistent airborne surveillance across huge areas of sea."
He added that this trial helps explore how simple, automated systems have the potential to replace complex machines.
“We are after more and greater capability in this field which delivers huge value for money. And, because it's new technology, with young people behind it, we're having fun doing it," Adm Zambellas said.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Trackwise Awarded Prestigious King’s Award for Enterprise for Innovation
04/24/2024 | TrackwiseTrackwise Designs plc, the innovative manufacturer of specialist products using printed circuit technology, is delighted to be recognised with a prestigious King’s Award for Enterprise. Announced, Friday 21 April, Trackwise has been recognised for its excellence in Innovation for its length-unlimited, multilayer flexible printed circuits.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
IDTechEx Discusses the Role of Printed Sensors in Mass-Digitization
04/11/2024 | PRNewswireIntegrated sensors digitizing physical interactions are vital in everyday life. From personalized user experiences to warehouse inventory management, data-driven insights are driving demand for smarter sensors — and lots of them.
An Ultimate Goal in Sustainability: Recyclable PCBs
04/11/2024 | Marcy LaRont, PCB007 MagazineWho doesn’t believe in recycling? “Re-use, repurpose, recycle” has been a drumbeat for more than two decades. Our children learn about it in primary school. Full university departments devoted to environmental science and sustainability in universities forward their discipline for the world's benefit. In theory, we all get behind the concept of recycling, even if the nuances of execution may fall short.