-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Gary Ferrari Shares His Thoughts on PCB Design and More
August 5, 2015 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
Recently, I had a chance to talk with Gary Ferrari, the director of technical support at Firan Technology Group Corporation (FTG), on numerous topics related to PCB design. Our conversation ranged from CID training to the need for reaching high school students as a way of introducing more young people to career opportunities in our industry. We also covered strategies for helping customers design and build better product, and keeping designers provided with the most critical part of their supply chain—information.
Barry Matties: Gary, please begin by telling us a little bit about FTG.
Gary Ferrari: FTG is a circuit board manufacturer—that's the circuits division. Then we have an aerospace division and their products are keyboards, bezels, and panels for the avionics industry. When you look at all the gauges on the dashboard of a cockpit, you are looking at the items we manufacture.
Matties: Is it more for military applications?
Ferrari: It’s for both commercial and military avionics. Our products are on helicopters and military aircraft. We're also on many of the commercial aircraft. We're on the new C919 from China. Actually, we have a plant to build those units over there. We have an aerospace and a circuits division in Toronto, as well as an aerospace and circuits division in Chatsworth, California.
Matties: What is your position at FTG?
Ferrari: I am the director of technical support—that means that I get into the customer prior to the design or during the design phase and I help them with their design issues. I look at manufacturability from a fabrication standpoint, as well as assembly, DFM, test, etc. I try to help them design a good product in the long run. That's where I serve best.
Matties: When you talk about working with customers, is that at the pre-circuit level when they are just imagining this stuff or is it beyond that?
Ferrari: They have already done the imagining, and now they need to bring it to the physical world. Sometimes they just don't understand the tolerances or the processes, the sequences in building a stack-up, material characteristics and combinations, buried vias and all those little details. I work with them so that they understand how to build something that's manufacturable and cost-effective. Anybody can design something, but when it comes down to getting fabricated, it could end up being a million-dollar design when it could have been maybe a thousand-dollar design, but they messed it all up. We try to help them out with that, and that's what my job is.
To read this entire article, which appeared in the July 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Absolute EMS Successfully Recertifies ISO 9001:2015 and AS9100 Standards
03/26/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, is proud to announce the successful recertification of its ISO 9001:2015 and AS9100 Rev D SAE International Aerospace Standards.
Arlon EMC Receives IPC-4101 QPL Recertification
03/20/2024 | Arlon Electronic MaterialsArlon Electronic Materials has successfully completed an intensive two-day recertification audit by IPC Validation Services that examined Arlon’s manufacturing processes and testing procedures to assure that they are in conformance to the requirements of IPC-4101E-WAM1, the Specification for Base Materials for Rigid and Multilayer Printed Boards.
Northrop Grumman Honors Suppliers for Excellence
03/14/2024 | Northrop GrummanNorthrop Grumman Corporation honored more than 70 suppliers for their outstanding contributions in 2023. In an annual recognition event, the companies included women-, minority- and veteran-owned small businesses as well as those operating in underdeveloped areas.
Cicor Acquires TT Electronics IoT Solutions
03/04/2024 | Cicor Technologies Ltd.The Cicor Group has signed an agreement to acquire TT Electronics IoT Solutions Ltd, with three production sites in the UK and China.
AEM, Texas Aerospace Technologies Bolster Partnership for Latin America
02/26/2024 | AEM Corp.Canadian avionics manufacturer, Anodyne Electronics Manufacturing Corp. (AEM), is pleased to announce a partnership expansion with Texas Aerospace Technologies, a subsidiary of Texas Aerospace Services, to add AEM’s new MTP136D modern panel-mount P25 VHF FM Forest Service radio to its lineup of product offerings for their Latin American customers.