-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Kelly Dack and Mark Thompson Unite in the War on Failure
September 9, 2015 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
There’s been a lot of talk about fighting the war on failure in the PCB industry. But what strategies should our generals follow to prosecute this war? What exactly constitutes a failure in the first place? Is this war even winnable? I recently spoke with longtime designer Kelly Dack and CAM support veteran Mark Thompson of Prototron Circuits about the best battle plans for beating failure, and why designers and manufacturers must team up against this common enemy.
Andy Shaughnessy: Kelly, you recently said, "Failure wins when it leverages the guerrilla warfare tactic of divide and conquer to confuse and disorient the product development community. Designers and manufacturers must unite to fight this war.”
Why don't you start off by saying what failure means to each of you at the design stage and at the board shop stage?
Kelly Dack: Andy, failure is defined as not meeting the intended objective. But I think the concept is easily confused if coming from isolated design and manufacturing perspectives. Meeting the intended objective successfully can only come from allied efforts. Designers need to describe or define objectives for their projects in terms of concise orders in order to make successful products, but this will only come about if the folks giving orders are also able to follow orders.
Mark Thompson: Absolutely, I agree with Kelly entirely. I'd say from the fabrication side, following orders is easy if the orders are given from time-proven, industry standard specification. We open the door for failure when we have to question orders. But we manufacturers have to occasionally, when the orders are outside of the guidelines of conventional process or machine capability. Designer and manufacturer communication and respect is key here, and I think this is why Kelly mentions that it is important that those giving orders must be willing to take them if the order would put the part at risk of failure.
Shaughnessy: Is failure always someone's fault or is it the fault of a bad process, or is it a combination of both?
Dack: I’m not comfortable pointing fingers at individuals. The causes for success and failure can be attributed to people, but it can also be caused by unforeseen conditions or even acts of God. A good strategy is to identify performance requirements and operating conditions. The “battle plan” needs to identify constraints: design constraints, manufacturing constraints, performance constraints, even cost constraints. Knowing the enemy and anticipating every possible way a design could possibly fail is crucial, but it can’t happen in a vacuum. It must occur through open communication with the allies – stakeholders of the product who are connected through the process steps.
Thompson: If you're asking if every failure is someone's fault, I would say yes, at the most base level. It will always turn out to be someone's fault either due to negligence or lack of vigilance. But, as Kelly said, there are extenuating circumstances. There can be dynamic situations where environmental, human or mechanical conditions create a failure in the field. Or it could be a poor design type of situation, where something wasn't properly considered in the original design phase. It’s a good time to draw in the metaphor of a combat unit here. No one person in a combat unit takes credit for the unit’s success or failure. They are a team!
To read this entire article, which appeared in the August 2015 issue of The PCB Design Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.